Magnetising the Stormraven wings can be very handy for storage and transport without buying a custom foam case.
Step 1: Glue the magnets in position. I used "green-stuff" to keep them in place. Then "colour" the top of the magnets with marker pen or a little paint.
Step 2: Then dry fit the wings, so the pen on the top of the magnet will mark the position where you need to drill - to secure the other magnet.
Step 3: Drill about 2mm. Don't worry about going too far. Because of the flat surface on the other side, any mistakes can be easily repaired with putty.
Step 4: Glue the magnets in place.
Step 5: Drill a hole and repeat Step 1 & 2
Step 6: Create a super-structure beneath the exhaust using bits and green stuff. Only use 1 magnet in the middle. Using 2 towards the back creates a moment and the front lifts up :,- (. I need to add a 3rd to the front now.
Fin: The wings will not balance until the engines are glued in place, so don't worry if they don't stay in place. I am going to spray the engines metal/silver before gluing in place.
